Request a free sample
Get everything you need
For best results, you should prepare a 75mm compacted Type 1 MOT limestone base and lay your turf on a 25mm layer of compacted sharp sand. To maintain levels it may be necessary to remove an equivalent amount of the topsoil. It is unwise to leave vegetable material under your new grass as this will rot down unevenly. The ground or sand should be compacted. For smaller areas you can do this with the back of a shovel or builders plank, or for larger areas use a vibrating plate compactor which can be hired at most equipment hire centres.
Should be laid immediately under the grass, this stops any seeds finding their way into the sand and germinating. Overlap the membrane by at least 200mm and take right to the edge of the area.
Lay the artificial grass on top of the membrane. Allow approximately 50mm of artificial grass to trim off to make that perfect edge. It’s a good idea to leave the grass for a day to settle. This helps to stop any creasing or wrinkling.
Butt any grass edges together, when you are satisfied with the result, peel the grass back and lay our fibreglass backing tape under the join.Using a spreader apply our Aqua Bond mastic adhesive or multi-purpose adhesive to the tape, then simply fold back the grass taking care not to squeeze the adhesive up on to the grass strands.
Cut and trim your artificial grass, using a sharp craft knife, making sure there are no gaps between walls and grass. Always use sharp blades and change the blade regularly. The grass sometimes has a material trim to one edge this is just from production and needs to be removed before laying, it is not for joining the edge, you will need to use joining tape and adhesive for all joins.
Use our ground pins, nailed into the ground at an angle every 200mm to secure the perimeter. Alternatively, you can create a small concrete haunch to glue to or bury lengths of treated timber to nail or tack to.
Take one step closer to beautiful grass all year round
Purchase Your New Grass Now